Bell 1 Battery-powered Doorbell


Appearance


Highlights

  • Advanced motion detection: built-in PIR sensor for motion detection; sends alerts as soon as motion is detected or when visitors press the doorbell.
  • Battery lock: designed to be of low power consumption, IFREEQ smart doorbell adopts detachable battery lock, which can be installed outdoors to prevent loss: when the battery box is connected to the doorbell host, the battery lock will be locked. ( Please note that the locked doorbell can only be unlocked through the "ColudEdge" App in your devices, you can simply remove the battery within 30 seconds ).
  • Full-duplex audio: when the ringing bell is triggered, you will get a call. You can see and hear the visitor in your App from the doorbell if you answer.
  • This doorbell supports 720P visual communication with 130-degree viewing angle and ICR infrared light night vision.
  • Low power alarm: the low power alarm value can be set on the mobile phone App ( the lowest setting is 10 percent, the highest 50 percent ). When the doorbell power is lower than the set value, a reminder will be sent to you.
  • Devices sharing: you can share the doorbell with your family so that they can preview online. There is no number limit of sharing devices, but only 6 accounts are supported for online preview at the same time.
  • Remote wake-up: when the doorbell is not in use, it will go in stand-by mode automatically for power-saving; it can be awakened remotely by your mobile phone, simply 3 - 4s to show you the visitor.

  • Tech Specs

    Sensor Type 1/4" CMOSPixel1Mega
    View Angel130°Shutter1/25 - 1/100,000 per second
    IRHigh power LED with ICRWDRDigital WDR
    Video compression standardH.264Bit rate   32Kbps - 2Mbps
    Max picture size1280 × 720Frame Rate1 - 25 per second
    Storage Support SD card(Max 128G), Cloud storageImage SettingSupport HD/SD; Support Mirror
    Human detectSupport PIRFunctionReset/Remote Wakeup
    TriggeringSupport button triggering,support PIRDrawing speed4 seconds
    Power5V -24V/DCBattery6,000mAh, rechargable
    Battery Ainti-theft LockSupportStandy consumption220mA
    Standby time10 MonthsWorking Time3 months(10 times wake up per day)
    Size58x130x26(With battery box)Weight225g

    Installation

    Installation of Power Supply Mode

    • Each input-cable(5 - 24V/AC) connect to the wires which ome out of the wall;
    • Track the bracket and lower cap apart from the bell. And connect the output-cable to the screws on the back of doorbell(red wire to the positive pole). Then paste mylar sticker in the dashed box;
    • Secure the bracket to the wall and buckle the doorbell into the bracket;
    • Fix the bottom to doorbell with screw.

    Install the device in battery-powered mode

    • Fix the bracket on the wall;
    • Disassemble the bottm of the doorbell as shown in the figure;
    • Snap the door bell into the bracket;
    • Align the battery box with the bayonet lock, and push the battery box into doorbell.

    In the Box
    &Package


    Manufacturer Information

    Part Number: MI-01-IFQ
    Warranty: One year

    Designed and Made in China

    Featured App




    Compatibility:
    Requires Android 4.0 or later;
    iOS 8.0 or later.

    Tuya Smart/ Smart Life

    With the Tuya Smart App, you can control all of your smart devices from anywhere in the world on your iOS/Android devices.
    Tuya is the simple way to a smarter home. Download the Tuya Smart app and control your lights, appliances, or a whole room from your couch, coffee shop, or the Caribbean.

    • Remotely control home appliances from anywhere
    • Add and control multiple devices at once with one App
    • Voice control via Amazon Echo and Google Assistant
    • Interworking of multiple smart devices. Devices automatically start/stop working based on temperature, location and time
    • Easily share devices among family members
    • Receive real-time alerts to ensure safety
    • Easily and quickly connect Tuya Smart App to devices

    More information about Tuya, visit www.tuya.com