X802U 2gang EU Standard Switch


Appearance


Highlights

Basic Function:

  • App Remote Control: Support iOS (8.0 and above) and Android (4.1 and above) phone or tablet. Add, delete your smart switch, and turn ON/OFF, schedule it. Multiple languages are supported;
  • Compatible with Alexa, Google Home: This smart switch works with Alexa and Google Home. After defining a name, such as "bedroom light switch", you can use voice control it by saying "Alexa, turn on the bedroom light";
  • WiFi Connection (2.4G ONLY): It connects to the WiFi router directly, no hub is required. Please note that only 2.4G is support;
  • Advanced Function:

  • IFTTT Control: Works with IFTTT to control the smart switch according to your conditions;
  • Repeat Schedule: Repeat schedule is available. You can create a schedule to turn your whole home's switches off before go to bed at night;
  • Group Control: Create a group to control different home devices at the same time;
  • Mode Control: Create different modes in the App, and control it according to different modes;
  • Share Devices: You can share the devices to your family, and then different people can control it without setting up again.

  • Tech Specs
    &Full Series

    Tech Specs

  • Materials: PC Fire Retardant, Crystal Tempered Glass
  • Max. Load Current: Resistive, Max.10A
  • Input Voltage: AC100~240V, 50/60Hz
  • Wireless Protocol: 802.11 b/g/n, 2.4GHz
  • Standby Consumption: <0.6W
  • Operating Temperatue: 0 – 40° C
  • Operating Humidity: 0 – 95% RH, non-condensing

  • Note

  • The Wi-Fi and Zigbee protocol models are based on Tuya platform. RF(Radio Frequency) models need to work with wireless remote switch.

  • IFREEQ reserves the right of final explanation.

    U86 Series

    1Wi-Fi
    X801U/U86W-1: 1gang EU standard tuya Wi-Fi smart switch
    X802U/U86W-2: 2gang EU standard tuya Wi-Fi smart switch
    X803U/U86W-3: 3gang EU standard tuya Wi-Fi smart switch
    2Wi-Fi, No-Neutral
    X811U/U86WN-1: 1gang EU standard no-neutral tuya Wi-Fi smart switch
    X812U/U86WN-2: 2gang EU standard no-neutral tuya Wi-Fi smart switch
    X813U/U86WN-3: 3gang EU standard no-neutral tuya Wi-Fi smart switch
    3Wi-Fi + RF
    X801U-RF/U86WR-1: 1gang EU standard tuya Wi-Fi+RF smart switch
    X802U-RF/U86WR-2: 2gang EU standard tuya Wi-Fi+RF smart switch
    X803U-RF/U86WR-3: 3gang EU standard tuya Wi-Fi+RF smart switch
    4Wi-Fi + RF, No-Neutral
    X801U-RF/U86WRN-1: 1gang EU standard no-neutral tuya Wi-Fi+RF smart switch
    X802U-RF/U86WRN-2: 2gang EU standard no-neutral tuya Wi-Fi+RF smart switch
    X803U-RF/U86WRN-3: 3gang EU standard no-neutral tuya Wi-Fi+RF smart switch
    5Zigbee
    X701U/U86Z-1: 1gang EU standard tuya Zigbee smart switch
    X702U/U86Z-2: 2gang EU standard tuya Zigbee smart switch
    X703U/U86Z-3: 3gang EU standard tuya Zigbee smart switch
    6Zigbee, No-Neutral
    X711U/U86ZN-1: 1gang EU standard no-neutral tuya Zigbee smart switch
    X712U/U86ZN-2: 2gang EU standard no-neutral tuya Zigbee smart switch
    X713U/U86ZN-3: 3gang EU standard no-neutral tuya Zigbee smart switch

    Installation
    &Quick Setup

    Installatin

    1. Turn off power at circuit breaker or fuse box and test that power is off before wiring.(Please switch the light several times to make sure that the power has been disconnected;
    2. Remove the existing switch and identify the wires with wire labels;
    3. Install the smart wall switch and connect the wires as required;
    4. Tuck the wires into the wall box leaving room for the smart switch. Using the screws provided, mount the smart switch to the wall box. Be careful not to crush any wires; (Note: Avoid overtightening the screws.)
    5. Install the wall plate, turn main power on at the circuit breaker, and test the switch by pressing the button;
    6. If it doesn't work, please check:
      a, if the wiring is correct;
      b, if the power is restored.
      If it works, add the switch to the app following the "Quick Setup"

    Quick Setup

      Please open the app, and then tap '+' in the top right corner to enter "Add device(Accessory)" page. Select"Smart Wall Switch", and add it according to instructions.
      * If the connection fails please move the hub closer to the switch, connect to power and try again.

    Warning

    • A certain amount of electrical knowledge is required to install a smart wall switch. For your safety, we recommend that you ask a qualified electrician to help you install it;
    • This product is for indoor use only; do not use it in humid environment;
    • Do not install this product near a heat source;
    • IMPORTANT!: This Smat Switch is rated for and intended to only be used with copper wire.

    Before you install

      This product is only used to replace a single pole switch than a 3-way switch.

    In the Box

  • 1 x X802U 2gang EU Standard Switch
  • 1 x user manul
  • 2 x screws

  • Manufacturer Information

    Part Number: LK-01-IFQ
    Warranty: One year

    Designed and Made in China


    Featured App




    Compatibility:
    Requires Android 4.0 or later;
    iOS 8.0 or later.

    Tuya Smart/ Smart Life

    With the Tuya Smart App, you can control all of your smart devices from anywhere in the world on your iOS/Android devices.
    Tuya is the simple way to a smarter home. Download the Tuya Smart app and control your lights, appliances, or a whole room from your couch, coffee shop, or the Caribbean.

    • Remotely control home appliances from anywhere
    • Add and control multiple devices at once with one App
    • Voice control via Amazon Echo and Google Assistant
    • Interworking of multiple smart devices. Devices automatically start/stop working based on temperature, location and time
    • Easily share devices among family members
    • Receive real-time alerts to ensure safety
    • Easily and quickly connect Tuya Smart App to devices

    More information about Tuya, visit www.tuya.com

    Store