u370 PIR Sensor Switch


Appearance


Highlights

  • Instant on and adjustable delay off time from 30 seconds to 120 minutes;
  • Ambient light sensitivity level adjustable;
  • PIR sensitivity level adjustable;
  • Easy installation into the wall;
  • Load power up to 600W;
  • Good for all kinds of loads (resistive, capacitive, and inductive);
  • ABS-V0 flame resistance material; and high quality build.

  • Tech Specs

  • Voltage: 108V~240V(45Hz~60Hz)
  • Operation Environment: No-condensation 20% to 90% RH, 0℃ to 40℃
  • Wattage: 600W Max for Incandescent Bulb, 150W Max for LED
  • PIR Working Range: Up to 8m (@25℃), in a cone of 120 degrees
  • Mounting Hole Spacing: 83.5mm
  • Dimension: 119*75*49.5mm

  • Installation
    &Operation Guide

    Installation

    1. Turn off power at circuit breaker or fuse box and test that power is off before wiring.(Please switch the light several times to make sure that the power has been disconnected;
    2. Remove the existing switch and identify the wires with wire labels;
    3. Install the smart wall switch and connect the wires as required;
    4. Tuck the wires into the wall box leaving room for the smart switch. Using the screws provided, mount the smart switch to the wall box. Be careful not to crush any wires; (Note: Avoid overtightening the screws.)
    5. Install the wall plate, turn main power on at the circuit breaker, and test the switch by pressing the button;
    6. If it doesn't work, please check:
      a, if the wiring is correct;
      b, if the power is restored.
      If it works, add the switch to the app following the "Operation Guide"

    Operation Guide

    1Overview
    The blue indicator will flicker 3 times after being powered on and u371 PIR switch needs a warm-up time for about 30s before it can operate properly. User can adjust the ambient light override threshold and delay-off time with the front button.
    2Manual and Auto Control
    Press the On/Off button 5 times and the led indicator flickers. The flickering times represent different ambient light sensitivity levels as shown in the table below. Pressing the On/Off button will change ambient light sensitivity settings (cycle through different levels). If there is no operation for 5 seconds, the last value of ambient light sensitivity level will be saved automatically and the blue indicator will stay on for 2 seconds and then go off.
    3Adjust PIR Sensitivity
    Press the On/Off button 4 times and the led indicator flickers. The flickering times represent different PIR sensitivity levels as shown in the table below. Pressing the On/Off button will change PIR sensitivity settings (cycle through different levels). If there is no operation for 5 seconds, the last value of PIR sensitivity levels will be saved automatically and the blue indicator will stay on for 2 seconds and then go off. Level 1-Level 7 : 1 for the lowest sensitivity (brightest ambient light); 1-7 Times respectively
    4Adjust delay-off time
    Press the On/Off button 6 times and the led indicator flickers. The flickering times represent different delay-off time as shown in the table below. Pressing the On/Off button will change different delay-off time (cycle through different values). If there is no operation for 5 seconds, the last value of different delay-off time will be saved automatically and the blue indicator will stay on for 2 seconds and then go off.
    5Indicator Flickering Times
    30 seconds Once 1 minute Twice 5 minutes Three Times 15 minutes Four Times 30 minutes Five Times 60 minutes Six Times 120 minutes Seven Times

    In the Box

  • 1 x u370 Tuya Wi-Fi PIR Sensor Switch
  • 1 x User Manual

  • Manufacturer Information

    Part Number: ASB-01-IFQ
    Warranty: One year

    Designed and Made in China

    Featured App




    Compatibility:
    Requires Android 4.0 or later;
    iOS 8.0 or later.

    Tuya Smart/ Smart Life

    With the Tuya Smart App, you can control all of your smart devices from anywhere in the world on your iOS/Android devices.
    Tuya is the simple way to a smarter home. Download the Tuya Smart app and control your lights, appliances, or a whole room from your couch, coffee shop, or the Caribbean.

    • Remotely control home appliances from anywhere
    • Add and control multiple devices at once with one App
    • Voice control via Amazon Echo and Google Assistant
    • Interworking of multiple smart devices. Devices automatically start/stop working based on temperature, location and time
    • Easily share devices among family members
    • Receive real-time alerts to ensure safety
    • Easily and quickly connect Tuya Smart App to devices

    More information about Tuya, visit www.tuya.com

    Store