Voltage AC110V - 240V | 50/60Hz Rated current 3A Set Point Range 10-40°C Ambient temperature 0°C - 50°C Size 86mm *86mm *38mm Storage temperature -10°C - 60°C Installation Wall mounted Accuracy ±0.5°C Sensor NTC Protection Class IP30 Housing ABS plastic Application 1 Central air conditioner Application 1 Fan coil units Fan Speed High, Middle, Low, Auto Weekly programmable 7, 6+1, 5+2 days programmable mode Lock Key lock function(chlildren lock) Mode 2 pipes or 4 pipes (heating/cooling) Type Touch screen,digital with timer System 1 2 pipes(only cooling ) System 2 4 pipes(cooling&heating) - 1 x HY609AC Thermostat
- 1 x Set interface accessories
- 1 x User manual
- To prevent the thermostat display from a high fluctuation, special treatment has been made to the program. Therefore, it is normal that the thermostat cannot immediately display the sudden change of temperature;
- The thermostat installed on 1.5m above the ground;
- For the thermostat installed,please take care not to install it to the wall corner, door / window side or behind the door or in such unheated area as exterior wall. Avoid hot / cold air duct, radiator, flue or thermal pipe;
- When install the power supply, make sure that the power cable is well insulated;
- Do not open the internal circuit board;
- HY08AC series thermostat design for the standard 75x75x 35mm wall mount box installed. Follow the instructions to open the rear cover base, mount it on the wall and wire it;
- Before installing the thermostat, make sure that the system is disconnected. The maximum voltage of the system shall meet the requirements specified in the Instruction Manual (Max. AC Voltage: 250V).
top of page
bottom of page