u371 PIR Sensor Dimmer Switch


Appearance


Highlights

  • Three operation modes: manual, occupancy and vacancy;
  • Adjustable ambient light override level;
  • Adjustable PIR sensitivity;
  • Adjustable delay-off time;
  • 7 dimming levels;
  • Good for dimmable CFLs, LEDs, incandescent blibs, and halogen blibs;
  • High quality flame resistance ABS material.

  • Tech Specs

  • Dimensions: 2.9*1.6*4.7 inches
  • Voltage: 120 volts
  • Wattage: 800 watts
  • Amperage Capacity: 10A
  • Maximum Power: 800 watts
  • Installation Method: Wall-Mounted
  • Measurement System: English/Standard
  • Plug Profile: In-wall installation
  • Switch Style: motion sensor, voice and remote control, button

  • Installation
    &Operation Guide

    Installation

    1. Turn off power at circuit breaker or fuse box and test that power is off before wiring.(Please switch the light several times to make sure that the power has been disconnected;
    2. Remove the existing switch and identify the wires with wire labels;
    3. Install the smart wall switch and connect the wires as required;
    4. Tuck the wires into the wall box leaving room for the smart switch. Using the screws provided, mount the smart switch to the wall box. Be careful not to crush any wires; (Note: Avoid overtightening the screws.)
    5. Install the wall plate, turn main power on at the circuit breaker, and test the switch by pressing the button;
    6. If it doesn't work, please check:
      a, if the wiring is correct;
      b, if the power is restored.
      If it works, add the switch to the app following the "Operation Guide"

    Operation Guide

    1Overview
    The blue indicator will flicker 3 times after being powered on and u371 PIR switch needs a warm-up time for about 30s before it can operate properly. User can adjust the ambient light override threshold and delay-off time with the front button.
    2Manual and Auto Control
    When movement detected, the load will be turned on automatically. When there is no movements, the load will be turned off automatically after a preset delay-off time. Press the on/off button on the switch will turn on/off the loads manually. Press the up button and/or down button will increase and/or decrease the light brightness. The LED indicator lights beside the buttons will indicate the brightness level. When there is only one LED indicator light on, it means the light is at the lowest brightness. When all the LED indicator lights are on, it means the light is at the highest brightness.
    3Adjust PIR Sensitivity
    Press the on/off button four times to enter the PIR sensitivity setting mode, and the power indicator light will normally on in blue. Press the up button and/or down button will increase and/or decrease the PIR sensitivity level. The LED indicator lights beside the buttons will indicate the PIR sensitivity level. When there is only one LED indicator light on, it means the PIR sensitivity is at the lowest level. When all the LED indicator lights are on, it means the PIR sensitivity is at the highest level. Press the on/off button to save the settings.
    4Adjust the Ambient Light Override Threshold
    Press the on/off button five times to enter the ambient light override threshold setting mode, and the power indicator light will flash in blue slowly. Press the up button and/or down button will increase and/or decrease the ambient light override threshold. The LED indicator lights beside the buttons will indicate the ambient light override threshold level. When there is only one LED indicator light on, it means the ambient light override threshold is at the lowest level. When all the LED indicator lights are on, it means the ambient light override threshold is at the highest level. Press the on/off button to save the settings.
    5Adjust the delay-off time
    Press the on/off button six times quickly to enter the delay off time setting mode, and the power indicator light will flash in blue quickly. Press the up button and/or down button will increase and/or decrease the delay-off time. The LED indicator lights beside the buttons will indicate the delay-off time. Please refer to the following table for delay off time vs. # of indicator lights on. Pess the on/off button to save the settings.

    In the Box

  • 1 x u371 Tuya Wi-Fi PIR Sensor Dimmer Switch
  • 1 x User Manual

  • Manufacturer Information

    Part Number: ASB-01-IFQ
    Warranty: One year

    Designed and Made in China

    Featured App




    Compatibility:
    Requires Android 4.0 or later;
    iOS 8.0 or later.

    Tuya Smart/ Smart Life

    With the Tuya Smart App, you can control all of your smart devices from anywhere in the world on your iOS/Android devices.
    Tuya is the simple way to a smarter home. Download the Tuya Smart app and control your lights, appliances, or a whole room from your couch, coffee shop, or the Caribbean.

    • Remotely control home appliances from anywhere
    • Add and control multiple devices at once with one App
    • Voice control via Amazon Echo and Google Assistant
    • Interworking of multiple smart devices. Devices automatically start/stop working based on temperature, location and time
    • Easily share devices among family members
    • Receive real-time alerts to ensure safety
    • Easily and quickly connect Tuya Smart App to devices

    More information about Tuya, visit www.tuya.com

    Store